Rubber & PTFE Component
 
Rubber Chemical
    Accelerator BSM
    Accelerator BSB
    Accelerator DCS
    Accelerator DPG
    Accelerator F
    Accelerator HBS
    Accelerator MBT
    Accelerator MBTS
    Accelerator MS
    Accelerator TMT
    Accelerator ZDBC
    Accelerator ZMBT
    Antioxidant 445
    Antioxidant A100
    Antioxidant B Rod
    Antioxidant BL
    Antioxidant BL75 S
    Antioxidant BLN
    Antioxidant MBI
    Antioxidant ODPS
    Antioxidant SP
    Antioxidant TQ
    Antioxidant ZA
    Antioxidant ZC
    Peptizer Accimel E
    Peptizer Accimel
    Retarder RE
    Tackifier CH
    Active Zinc Oxide
    ADC Blowing Agent
    Stearate
 
Chemical - Master Batch
    Rubber Accelerater R 100
    Rubber Accelerater R 170
 
Chemical - Modified Sulphur
    CCS
    ICS
 
Chemical - Modified Resin
    Resin 300 M
    Resin 300 T
    Resin 500
    Resin 400
 
Rubber Compound
 
NBR - PVC Polymer Blend
 
Reclaim Rubber
 
Rubber Polymers
 
Precipitated Silica
 
Oil & Lubricant
 
Zeolite


ANTIOXIDANT 445

445 is heat resistant (slightly staining) antioxidant. It is a slightly staining & discoloring antioxidant being stable at

high temperature, is used for protection against heat and oxidative degradations in NR and synthetic rubbers

including BR, SBR, NBR, CR and EPDM covering uses in beltings, hoses, seals, gaskets and other

automotive/industrial rubber products. In combination with synergistic antioxidants it provides an extremely

effective antioxidant system for EPDM and NBR compounds for high temperature applications. Often used as

aqueous dispersions in latex compounds (SBR, Carboxylated SBR and NR) for improving resistance to heat and

embrittlement during aging with as little 0.5 phr in the compound. Typical dosages in rubber vary from 1 to 3 phr

depending on the application envisaged.

Storage and Handling

Store in a cool, dry & well-ventilated place, local exhaust recommended. Keep container closed when not in use.

No special handling precautions are necessary. Normal precautions to avoid contact with skin and eyes should be

followed. For eyes, flush with plenty of water and seek medical advice.


 
Chemical Composition: 4,4’-Bis(a,a-dimethylbenzyl) diphenylamine
  Physical Properties
    Appearance: White powder
    Sp Gr. at 25°C : 1.14 (Typical)
 
   
  Typical Analysis
         
   
Parameter
Limits
ASTM Test method
     
  Melting Point (°C) - Initial
98 min
D 1519
     
  Melting Point (°C) - Final
102 max
D 1519
     
  Loss on drying 1hr/70°C (%)
0.3 max
D 4571
     
  Ash Content (%)
0.3 max
D 4574
     
  Solubility Insoluble in water.Soluble in acetone/toluene
 
   
Packaging : 25 Kg. in HDPE lined Paper Bags
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© 2010 Swastika Constant Care. All rights reserved. Terms of Use and Disclaimer