Rubber & PTFE Component
 
Rubber Chemical
    Accelerator BSM
    Accelerator BSB
    Accelerator DCS
    Accelerator DPG
    Accelerator F
    Accelerator HBS
    Accelerator MBT
    Accelerator MBTS
    Accelerator MS
    Accelerator TMT
    Accelerator ZDBC
    Accelerator ZMBT
    Antioxidant 445
    Antioxidant A100
    Antioxidant B Rod
    Antioxidant BL
    Antioxidant BL75 S
    Antioxidant BLN
    Antioxident MBI
    Antioxidant ODPS
    Antioxidant SP
    Antioxidant TQ
    Antioxidant ZA
    Antioxidant ZC
    Peptiser Accimel E
    Peptiser Accimel
    Retarder RE
    Tackifier CH
    Active Zinc Oxide
    ADC Blowing Agent
    Stearate
 
Chemical - Master Batch
    Rubber Accelerater R 100
    Rubber Accelerater R 170
 
Chemical - Modified Sulphur
    CCS
    ICS
 
Chemical - Modified Resin
    Resin 300 M
    Resin 300 T
    Resin 500
    Resin 400
 
Rubber Compound
 
NBR - PVC Polymer Blend
 
Reclaim Rubber
 
Rubber Polymers
 
Precipitated Silica
 
Oil & Lubricant
 
Zeolite


PEPTISER ACCIMEL E

Accimel E is used as a peptiser for natural and synthetic rubbers. It disperses readily and can be added to the

rubber on open roll or in internal mixer. Its use improves mill room productivity with improved dispersion of fillers.

Being based on DBDS it is viewed as a preferred peptiser for radial tyre compounds. Typical dosage in NR varies

from 0.2 – 0.5 phr while higher dosages eg 0.5 – 1.0 phr are required in synthetic rubbers.

Storage and Handling

Stable indefinitely under normal conditions of storage. No special handling precautions are necessary. Normal

precautions to avoid contact with skin and eyes should be followed. For eyes, flush with plenty of water and

seek medical advice.


 
Chemical Composition: A blend containing dibenzamido diphenyl disulphide
      with an activator and dispersing aids.
  Physical Properties
    Appearance: Pale gray to greenish gray powder/ pellets.
    Sp Gr. at 25°C : 2.2 ( Typical)
 
   
  Typical Analysis
         
   
Parameter
Limits
ASTM Test method
     
  Loss at 100°C for 2 hours (%)
0.75 max
D 4571
     
  Chloroform Soluble (%)
45 - 52
D 4934
     
  Ash Content (%)
40-50
D 4574
     
  Fineness, ret on 100 mesh (%)
1.0 ± 0.50
D 4572
       
  Solubility Insoluble in water, partially soluble in acetone.
 
   
Packaging : 20/25 Kg. in HDPE lined Paper Bags/FB drums.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© 2010 Swastika Constant Care. All rights reserved. Terms of Use and Disclaimer