Rubber & PTFE Component
Rubber Chemical
    Accelerator BSM
    Accelerator BSB
    Accelerator DCS
    Accelerator DPG
    Accelerator F
    Accelerator HBS
    Accelerator MBT
    Accelerator MBTS
    Accelerator MS
    Accelerator TMT
    Accelerator ZDBC
    Accelerator ZMBT
    Antioxidant 445
    Antioxidant A100
    Antioxidant B Rod
    Antioxidant BL
    Antioxidant BL75 S
    Antioxidant BLN
    Antioxidant MBI
    Antioxidant ODPS
    Antioxidant SP
    Antioxidant TQ
    Antioxidant ZA
    Antioxidant ZC
    Peptizer Accimel E
    Peptizer Accimel
    Retarder RE
    Tackifier CH
    Active Zinc Oxide
    ADC Blowing Agent
Chemical - Master Batch
    Rubber Accelerater R 100
    Rubber Accelerater R 170
Chemical - Modified Sulphur
Chemical - Modified Resin
    Resin 300 M
    Resin 300 T
    Resin 500
    Resin 400
Rubber Compound
NBR - PVC Polymer Blend
Reclaim Rubber
Rubber Polymers
Precipitated Silica
Oil & Lubricant


Accinox BLN provides a combination of excellent resistance to flex cracking and heat ageing. It is specially suited

for tires, belting, hoses and a wide range of mechanical rubber goods. It is a staining antioxidant and may stain by

migration. Typical dosage varies from 1.0 – 3.0 phr without any blooming. In tread rubber compounds which are

required to store at room temperature for prolong periods, BLN plays an important role in suppressing sulphur

blooming in these compounds. Being readily dispersible, it is usually better to use BL/BLN in soft rubber

compounds like cushion gum etc. It could be used as a stabilizer for production of oil extended SBR.

Storage and Handling

Stable indefinitely under normal storage conditions.

No special precautions are necessary. Normal precautions to avoid contact with skin and eyes should be

followed. Skin contamination: Wash liberally with soap and water. In case of contact with eyes rinse immediately

with plenty of water and seek medical advice.

Chemical Composition: A condensation product of Acetone & Diphenylamine
  Physical Properties
    Appearance: A dark brown viscous liquid.
    Sp Gr. at 25°C : 1.09 – 1.11 (ASTM D1298)
  Typical Analysis
ASTM Test method
  Saybolt Viscosity SFS @ 54.5°C
65 - 90
D 88
  Volatile Matter, 2hrs/70°C (%)
1.0 max
D 4571
  Ash Content (%)
0.5 max
D 4574
  Solubility Insoluble in waterslightly soluble in petroleum
      ether, soluble in acetone and chloroform.
Packaging : 210 Kg. in MS drums.
© 2010 Swastika Constant Care. All rights reserved. Terms of Use and Disclaimer