Rubber & PTFE Component
Rubber Chemical
    Accelerator BSM
    Accelerator BSB
    Accelerator DCS
    Accelerator DPG
    Accelerator F
    Accelerator HBS
    Accelerator MBT
    Accelerator MBTS
    Accelerator MS
    Accelerator TMT
    Accelerator ZDBC
    Accelerator ZMBT
    Antioxidant 445
    Antioxidant A100
    Antioxidant B Rod
    Antioxidant BL
    Antioxidant BL75 S
    Antioxidant BLN
    Antioxidant MBI
    Antioxidant ODPS
    Antioxidant SP
    Antioxidant TQ
    Antioxidant ZA
    Antioxidant ZC
    Peptizer Accimel E
    Peptizer Accimel
    Retarder RE
    Tackifier CH
    Active Zinc Oxide
    ADC Blowing Agent
Chemical - Master Batch
    Rubber Accelerater R 100
    Rubber Accelerater R 170
Chemical - Modified Sulphur
Chemical - Modified Resin
    Resin 300 M
    Resin 300 T
    Resin 500
    Resin 400
Rubber Compound
NBR - PVC Polymer Blend
Reclaim Rubber
Rubber Polymers
Precipitated Silica
Oil & Lubricant


B Rod is an excellent general purpose staining antioxidant. It confers very good heat resistance and good flex

cracking resistance. It disperses readily in rubber and does not bloom. It is used in automotive tubes, curing bags

and in mechanical rubber goods. B Rod is suitable for use in latex compounds. Typical dosage varies from 0.25 –

2.0 phr although in exceptional circumstances up to 3.0 phr may be used to confer high heat resistance without

bloom. It also possesses metal inhibition properties to some extent and recommended for cable insulations,

rubber to bra ss bonding, hoses and latex foam, gloves & coir mattress compounds.

Storage and Handling

Stable indefinitely under normal storage conditions.No special precautions are necessary. Normal precautions to

avoid contact with skin and eyes should be followed. Skin contamination: Wash liberally with soap and water. In

case of contact with eyes rinse immediately with plenty of water and seek medical advice.

Chemical Composition: A condensation product of Acetone & Diphenylamine
  Physical Properties
    Appearance: Dark brown to black rods / powder.
    Sp Gr. at 25°C : 1.14 (Typical)
  Typical Analysis
ASTM Test method
  Softening Point (°C)
95 ±10 min
E 28
  Fineness on 100 msh, Ret (%)
0.5 max
D 4572
  Loss on drying 1hr/70°C (%)
0.5 max
D 4571
  Ash Content (%)
0.5 max
D 4574
  Solubility Insoluble in water.Slightly soluble in petroleum
      ether and in alcohol, soluble in acetone.
Packaging : 25 Kg. in HDPE lined Paper Bags
© 2010 Swastika Constant Care. All rights reserved. Terms of Use and Disclaimer