Rubber & PTFE Component
 
Rubber Chemical
    Accelerator BSM
    Accelerator BSB
    Accelerator DCS
    Accelerator DPG
    Accelerator F
    Accelerator HBS
    Accelerator MBT
    Accelerator MBTS
    Accelerator MS
    Accelerator TMT
    Accelerator ZDBC
    Accelerator ZMBT
    Antioxident 445
    Antioxident A100
    Antioxident B Rod
    Antioxident BL
    Antioxident BL75 S
    Antioxident BLN
    Antioxident MBI
    Antioxident ODPS
    Antioxident SP
    Antioxident TQ
    Antioxident ZA
    Antioxident ZC
    Peptizer Accimel E
    Peptizer Accimel
    Retarder RE
    Tackifier CH
    Active Zinc Oxide
    ADC Blowing Agent
    Stearate
 
Chemical - Master Batch
    Rubber Accelerater R 100
    Rubber Accelerater R 170
 
Chemical - Modified Sulphur
    CCS
    ICS
 
Chemical - Modified Resin
    Resin 300 M
    Resin 300 T
    Resin 500
    Resin 400
 
Rubber Compound
 
NBR - PVC Polymer Blend
 
Reclaim Rubber
 
Rubber Polymers
 
Precipitated Silica
 
Oil & Lubricant
 
Zeolite


ACCELERATOR MS

MS is a Ultra Thiuram Accelerator. It is a fast accelerator often used as a booster for good processing safety in

comparison with other thiurams. Unlike thiuram disulphides, the monosulphides do not produce satisfactory cures

in complete absence of elemental sulphur. Typical dosage: 0.2 – 0.5 phr.

In polychloroprene rubbers, MS(1.0 phr)used with DPG or DOTG (1.0 phr) and sulphur (0.5 phr) gives a curing

system which is a useful alternative to ethylene thiourea (ETU). It offers better processing safety with similar

curing activity.

Storage and Handling

Stable (for a period of one year) under normal storage conditions. No special handling precautions are necessary.

Normal precautions to avoid contact with skin and eyes should be followed. For eyes, flush with plenty of water

and seek medical advice.


 
Chemical Composition: Tetramethyl thiuram monosulphide
  Physical Properties
    Appearance: Lemon yellow powder
    Sp Gr. at 25°C : 1.38 (Typical)
 
   
  Typical Analysis
         
   
Parameter
Limits
ASTM Test method
     
  Melting Point (°C)
105 min
D 1519
     
  Loss at 100°C for 2 hours (%)
0.5 max
D 4571
     
  Ash Content (%)
0.5 max
D 4574
     
  Solubility Insoluble in water. Soluble in chloroform;
 
   
Packaging : 20 Kg. in HDPE lined Paper Bags
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© 2010 Swastika Constant Care. All rights reserved. Terms of Use and Disclaimer